| Customization: | Available |
|---|---|
| Type: | Floating Ball |
| Contact: | Contactless |
| Shipping Cost: | Contact the supplier about freight and estimated delivery time. |
|---|
| Payment Methods: |
|
|---|---|
| Support payments in USD |
| Secure payments: | Every payment you make on Made-in-China.com is protected by the platform. |
|---|
| Refund policy: | Claim a refund if your order doesn't ship, is missing, or arrives with product issues. |
|---|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
WINDBELL SP300 Magnetostrictive oil level sensor is mainly composed of probe head, temperature sensors, protection steel pipe, magnetostrictive waveguide wire and floaters with magnet inside. Insert probe into underground tank, floaters float on the liquid surface, and slides up and down on rod according to the changes of liquid level. Processing measured data of product level, water level, density values (option), and average temperature of five-points, then transmit these data to smart console by digital communication port.
| Power supply | DC12V |
| Precision | ±0.5mm |
| Repeatability | ±0.1mm |
| Resolution of product level | 0.0069mm |
| Resolution of temperature | 0.0078ºC |
| Resolution of water level | 0.0069mm |
| Temperature range | -40 to 85ºC(-40 to 185ºF) |
| Points of temperature measured | 5 |
| Maximum communication distance | 1200m |
| Communication | RS485 |
| Intrinsic safety parameter | Power port: Ui = 15V DC, Ii= 400mA, Pi = 1.5W, Ci = 3.63μF, Li = 0mH; Signal port: Ui = 7.14V DC, Ii= 147mA, Pi = 260mW, Ci = 32.6μF, Li = 0mH; |
| Associated apparatus | WB-GSB03 safety barrier |
| Explosion proof grade | Ex ia II A T4 Ga, Ex II 1G Ex ia IIA T4 Ga |
| Protection grade | IP68 |
| Applicable medium | Gasoline, kerosene, diesel, Ethanol gasoline, Methanol gasoline, Approved light oil |
| Definition of wires | Blue Power + Brown RS485A White RS485B Black Power - |
| Communication address | 6 digits, see the"Manufacturing code"or S/N code on probe nameplate, this is also Probe ID in communication with console and FMS |
){kind=link}